air_black
03-16-2013, 04:40 PM
DiagBox v6.01 And v6.24 Upgrade Multilingual
http://buspic.com/img/file13528251651.jpg
DiagBox v6.01 And v6.24 Upgrade Multilingual | 1.63 GB
Dealer diagnostic program for cars PEUGEOT & CITROEN. Works with the original Chinese and adapters XS Evolution Lexia3.
Installation
1) Mount the image on DVD or a virtual drive (you can use DaemonTools Lite - free)
2) To install software, go
3) Copy the patch to 'C: \ AWRoot \ bin \ fi \ cache \'
4) Run the patch (you should have successfull message)
5) Run DiagBox
6) Run the activation (finger with the hand) DiagBox (In the window write 1234567 click OK. Next there are 2 fields in the first write 12345678901234567890123456789011 second 02FFFFFF click OK
6.1) You put a token and pp2000
7) go out, start to upgrade to 6.24
7.1) password to install new things scary01
7.2) If you are asked to reboot - do not hesitate to reboot
8) Connect the Chinese after starting the software or you can turn off auto-update the firmware: paramount, as Chinese who have upgraded to version 4.3.0 will not work with diagboksom, and generally with Lex.
8.1) Find the file C: \ AWRoot \ bin \ launcher \ ap.ini
8.2) Change the value MAJ_COM = TRUE on ---> MAJ_COM = FALSE
If all happened terrible - leksiya/pp2000 not plow, the solution below:
8.3) If your adapter does not see a car or determine only wine, use the PSA Interface Checker to change the adapter.
8.4) Go to the PSA Interface Checker -> Version. If the version 4.3.0 - you need to roll back to 4.2.2. Choose the third button Select File, I've found out there are looking for a folder with the version 4.2.2 and it is discovered. Next last button Downloading and waiting a minute. Once it write something in broken French - all ok. Version Nazhmaem again and see that the version 4.2.2.
utility TLCD (a) vadimus_ca (idea mudrec1980) - you can disable the code request at telekodirovanii
! WARNING! after the upgrade to 6.19 is not pressed for updates on the Internet, or fly off activation in versions older than 6.18 otsutvie manual activation. have carefully moving the software!
The assembly
1) If you put a program from the ground up - put the patch 6.01 -> 6.24
2) If you are upgrading from 6.19 - put all the patches one by one inside (6.19-> 6.20, 6.20-> 6.22, 6.22> 6.23, 6.23-> 6.24) and of course, do not swing ful patch 6.01> 6.24
mini FAQ
Q: I activation after entering 1234567 writes Activation error (error 0)
A: In Device Manager, set the driver for all the undecided normal devices (hanging yellow question for). If this is not possible - just delete them from there, but this "crutch" and helps temporarily.
http://rapidgator.net/file/4b1296ca00dfb8da54ad320df526ea38/DiagBox.part1.rar.html
http://rapidgator.net/file/b6ad3ad8262c33f9b88eeef2f7fd3f6c/DiagBox.part2.rar.html
Mirror:
http://uploaded.net/file/tu7px17r/DiagBox.part1.rar
http://uploaded.net/file/f9df7rxk/DiagBox.part2.rar
Mirror2:
http://extabit.com/file/279m9f9vubu9v/DiagBox.part1.rar
http://extabit.com/file/279m9f9rk465f/DiagBox.part2.rar
Mirror3:
http://ryushare.com/949336ebe87/DiagBox.part1.rar
http://ryushare.com/98f0cd2dac4/DiagBox.part2.rar
http://buspic.com/img/file13528251651.jpg
DiagBox v6.01 And v6.24 Upgrade Multilingual | 1.63 GB
Dealer diagnostic program for cars PEUGEOT & CITROEN. Works with the original Chinese and adapters XS Evolution Lexia3.
Installation
1) Mount the image on DVD or a virtual drive (you can use DaemonTools Lite - free)
2) To install software, go
3) Copy the patch to 'C: \ AWRoot \ bin \ fi \ cache \'
4) Run the patch (you should have successfull message)
5) Run DiagBox
6) Run the activation (finger with the hand) DiagBox (In the window write 1234567 click OK. Next there are 2 fields in the first write 12345678901234567890123456789011 second 02FFFFFF click OK
6.1) You put a token and pp2000
7) go out, start to upgrade to 6.24
7.1) password to install new things scary01
7.2) If you are asked to reboot - do not hesitate to reboot
8) Connect the Chinese after starting the software or you can turn off auto-update the firmware: paramount, as Chinese who have upgraded to version 4.3.0 will not work with diagboksom, and generally with Lex.
8.1) Find the file C: \ AWRoot \ bin \ launcher \ ap.ini
8.2) Change the value MAJ_COM = TRUE on ---> MAJ_COM = FALSE
If all happened terrible - leksiya/pp2000 not plow, the solution below:
8.3) If your adapter does not see a car or determine only wine, use the PSA Interface Checker to change the adapter.
8.4) Go to the PSA Interface Checker -> Version. If the version 4.3.0 - you need to roll back to 4.2.2. Choose the third button Select File, I've found out there are looking for a folder with the version 4.2.2 and it is discovered. Next last button Downloading and waiting a minute. Once it write something in broken French - all ok. Version Nazhmaem again and see that the version 4.2.2.
utility TLCD (a) vadimus_ca (idea mudrec1980) - you can disable the code request at telekodirovanii
! WARNING! after the upgrade to 6.19 is not pressed for updates on the Internet, or fly off activation in versions older than 6.18 otsutvie manual activation. have carefully moving the software!
The assembly
1) If you put a program from the ground up - put the patch 6.01 -> 6.24
2) If you are upgrading from 6.19 - put all the patches one by one inside (6.19-> 6.20, 6.20-> 6.22, 6.22> 6.23, 6.23-> 6.24) and of course, do not swing ful patch 6.01> 6.24
mini FAQ
Q: I activation after entering 1234567 writes Activation error (error 0)
A: In Device Manager, set the driver for all the undecided normal devices (hanging yellow question for). If this is not possible - just delete them from there, but this "crutch" and helps temporarily.
http://rapidgator.net/file/4b1296ca00dfb8da54ad320df526ea38/DiagBox.part1.rar.html
http://rapidgator.net/file/b6ad3ad8262c33f9b88eeef2f7fd3f6c/DiagBox.part2.rar.html
Mirror:
http://uploaded.net/file/tu7px17r/DiagBox.part1.rar
http://uploaded.net/file/f9df7rxk/DiagBox.part2.rar
Mirror2:
http://extabit.com/file/279m9f9vubu9v/DiagBox.part1.rar
http://extabit.com/file/279m9f9rk465f/DiagBox.part2.rar
Mirror3:
http://ryushare.com/949336ebe87/DiagBox.part1.rar
http://ryushare.com/98f0cd2dac4/DiagBox.part2.rar