always
04-01-2015, 03:49 PM
AirSlax 5.3 PRO + Extras Modules & Video Course (April 01, 2015)
http://i65.fastpic.ru/big/2015/0331/57/c328136ab7de3ae2246f7decbefcc157.jpg
AirSlax 5.3 PRO + Extras Modules & Video Course | 3,49 GB
Features of Pro version AirSlax:
Contains an extensive range of programs to intercept and password guessing.
Allows for selection of the password using the GPU graphics cards from AMD and NVIDIA.
Contains a large dictionary for brute-force attack.
Opportunities AirSlax PRO:
Interception and hacking WiFi networks with all types of encryption.
Run from USB Flash Operating system installed on your computer does not matter and is completely safe, because all data and changes are written to the flash drive.
Support for a large number of WiFi adapters for interception.
Use the power card to bruteforce WPA/WPA2, which allows to increase the speed of selection in the tens and hundreds of times.
Interception and hacking:
WPA2 (dictionary 1.2 Gb included)
WEP (selection for 5-15 minutes)
WPS (password of any complexity)
Support GPU: password guessing using graphics cards:
AMD
NVIDIA
- The speed of password guessing 10-100 times higher than on the processor (CPU)
Speed matching on the GPU :
AMD Radeon HD 7290
- 2 200 passwords in seconds.
NVidia GeForce GTX 580
- 47 000 passwords per sec.
AMD Radeon HD 5770
- 50 000 passwords per sec.
NVidia GeForce GTX 750Ti
- 54 000 passwords per sec.
AMD Radeon HD 7970
- 130 000 passwords per sec.
AMD Radeon HD 6990
- 181 000 passwords per sec
Also for the selection of the password from Windows systems, you can use the program EWSA.
Menu:
1. Scan the ether
When you select this menu item, scan available Wi-Fi networks and clients connected to them.
2. Pick a goal
Here you can select a target for attack from the list of networks obtained earlier.
3. Intercept the target
Interception takes place packets coming from/to the selected Wi-Fi network. You must wait for the appearance of handshake - in the upper right corner to display the message "WPA HANDSHAKE". This window should not close if you want to perform the following paragraph.
4. Disconnect the client
Disabling the client in order to obtain handshake, as it is transmitted only when connected to Wi-Fi network. Therefore, when the client is disconnected and needs to be launched item 3 menu - intercept the target.
5. Password WPA
After handshake caught, you can begin to match the password in the dictionary. A small dictionary is already in the program, and to connect new, you must copy them into the directory \slax\dict\ on the flash drive.
6. Save the result
You can save the results of interception to work with him in the future. The results are stored in the directory \slax\changes\dump\result\. The file name is formed from the name of the Wi-Fi network and has an extension .cab.
7. Password WEP
8. Scan WPS
Scanning Wi-Fi networks with authorization by the WPS Protocol.
9. Selection PIN WPS
Selection pin WPS takes a considerable amount of time - from several hours to several days. Nevertheless, reveal passwords of any complexity.
10. AUTOFIT and interception
This function scans and hacking Wi-Fi networks automatically, but should not be overused, as it is much littering the air.
Installation:
1. To copy the contents of the folder AirSlax5.3Pr0 in the root of the flash drive, the file system on the flash drive must be FAT16 or FAT32,
2. Go to the folder boot and run the installer (There are versions for Windows and Linux). After that, the flash drive will be bootable.
3. Will boot from the stick.
Video course 'Hack WiFi with AirSlax'
How to know if your protected Wi-Fi network? The simplest and most importantly reliable way is to Hack Wi - Fi! If You could hack into Your Wi-Fi, then it will work and that of others. And You might want something izmenit in the security settings. But how to do it? Where to start and how is it done? For this You do not need to spend in search of bits of information on the Internet weeks and months. All You need is to study video course: "Hacking WiFi with AirSlax".
The course contains practical guidance, no lengthy theoretical digressions. Only the most necessary and useful information.
For whom is this course? For those who want to quickly and efficiently learn how to hack WiFi networks, as well as to understand the principles of secure WiFi networks. For those who want to see in practice in protecting your WiFi network and help friends and acquaintances. For professional penetration testers and those who want to become professional in this field and earn on finding vulnerabilities in other people's WiFi networks.
In the video course:
Considers the issues of working with AirSlax 3 and AirSlax 5 for hacking WiFi networks with different types of encryption - WEP, WPA/WPA2, as well as work with the WPS Protocol vulnerability.
Described the intricacies of working with the program, allowing to increase the efficiency of interception and increase the likelihood of a successful attack.
Consider additional remedies WiFi network (MAC filter, disable DHCP, etc) and ways to overcome them.
Contents:
Introduction
Hacking WiFi with WEP AirSlax
Hacking WiFi with AirSlax WPA and WPA2
Selection PIN Protocol VPS
Password WEP and WPA
Search for clients
Apropos and interception
MAC filter
Manage network connections
The subtleties of working with AirSlax
Intercept the target
Disconnect client
WPA password
Save the result.
Create bootable flash drives.
Fix partition on the flash drive.
Start WiFi Slax (Linux) on a virtual machine in VMware Workstation on Windows
DOWNLOAD LINKS:
http://rapidgator.net/file/9f30a50d9ac4a91af3c11818034bf5c2/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar.html
http://uploaded.net/file/408ly5tw/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar
http://www.nitroflare.com/view/EB36530A53418A0/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar
http://www.uploadable.ch/file/3ByFtKyfCGmp/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar
http://i65.fastpic.ru/big/2015/0331/57/c328136ab7de3ae2246f7decbefcc157.jpg
AirSlax 5.3 PRO + Extras Modules & Video Course | 3,49 GB
Features of Pro version AirSlax:
Contains an extensive range of programs to intercept and password guessing.
Allows for selection of the password using the GPU graphics cards from AMD and NVIDIA.
Contains a large dictionary for brute-force attack.
Opportunities AirSlax PRO:
Interception and hacking WiFi networks with all types of encryption.
Run from USB Flash Operating system installed on your computer does not matter and is completely safe, because all data and changes are written to the flash drive.
Support for a large number of WiFi adapters for interception.
Use the power card to bruteforce WPA/WPA2, which allows to increase the speed of selection in the tens and hundreds of times.
Interception and hacking:
WPA2 (dictionary 1.2 Gb included)
WEP (selection for 5-15 minutes)
WPS (password of any complexity)
Support GPU: password guessing using graphics cards:
AMD
NVIDIA
- The speed of password guessing 10-100 times higher than on the processor (CPU)
Speed matching on the GPU :
AMD Radeon HD 7290
- 2 200 passwords in seconds.
NVidia GeForce GTX 580
- 47 000 passwords per sec.
AMD Radeon HD 5770
- 50 000 passwords per sec.
NVidia GeForce GTX 750Ti
- 54 000 passwords per sec.
AMD Radeon HD 7970
- 130 000 passwords per sec.
AMD Radeon HD 6990
- 181 000 passwords per sec
Also for the selection of the password from Windows systems, you can use the program EWSA.
Menu:
1. Scan the ether
When you select this menu item, scan available Wi-Fi networks and clients connected to them.
2. Pick a goal
Here you can select a target for attack from the list of networks obtained earlier.
3. Intercept the target
Interception takes place packets coming from/to the selected Wi-Fi network. You must wait for the appearance of handshake - in the upper right corner to display the message "WPA HANDSHAKE". This window should not close if you want to perform the following paragraph.
4. Disconnect the client
Disabling the client in order to obtain handshake, as it is transmitted only when connected to Wi-Fi network. Therefore, when the client is disconnected and needs to be launched item 3 menu - intercept the target.
5. Password WPA
After handshake caught, you can begin to match the password in the dictionary. A small dictionary is already in the program, and to connect new, you must copy them into the directory \slax\dict\ on the flash drive.
6. Save the result
You can save the results of interception to work with him in the future. The results are stored in the directory \slax\changes\dump\result\. The file name is formed from the name of the Wi-Fi network and has an extension .cab.
7. Password WEP
8. Scan WPS
Scanning Wi-Fi networks with authorization by the WPS Protocol.
9. Selection PIN WPS
Selection pin WPS takes a considerable amount of time - from several hours to several days. Nevertheless, reveal passwords of any complexity.
10. AUTOFIT and interception
This function scans and hacking Wi-Fi networks automatically, but should not be overused, as it is much littering the air.
Installation:
1. To copy the contents of the folder AirSlax5.3Pr0 in the root of the flash drive, the file system on the flash drive must be FAT16 or FAT32,
2. Go to the folder boot and run the installer (There are versions for Windows and Linux). After that, the flash drive will be bootable.
3. Will boot from the stick.
Video course 'Hack WiFi with AirSlax'
How to know if your protected Wi-Fi network? The simplest and most importantly reliable way is to Hack Wi - Fi! If You could hack into Your Wi-Fi, then it will work and that of others. And You might want something izmenit in the security settings. But how to do it? Where to start and how is it done? For this You do not need to spend in search of bits of information on the Internet weeks and months. All You need is to study video course: "Hacking WiFi with AirSlax".
The course contains practical guidance, no lengthy theoretical digressions. Only the most necessary and useful information.
For whom is this course? For those who want to quickly and efficiently learn how to hack WiFi networks, as well as to understand the principles of secure WiFi networks. For those who want to see in practice in protecting your WiFi network and help friends and acquaintances. For professional penetration testers and those who want to become professional in this field and earn on finding vulnerabilities in other people's WiFi networks.
In the video course:
Considers the issues of working with AirSlax 3 and AirSlax 5 for hacking WiFi networks with different types of encryption - WEP, WPA/WPA2, as well as work with the WPS Protocol vulnerability.
Described the intricacies of working with the program, allowing to increase the efficiency of interception and increase the likelihood of a successful attack.
Consider additional remedies WiFi network (MAC filter, disable DHCP, etc) and ways to overcome them.
Contents:
Introduction
Hacking WiFi with WEP AirSlax
Hacking WiFi with AirSlax WPA and WPA2
Selection PIN Protocol VPS
Password WEP and WPA
Search for clients
Apropos and interception
MAC filter
Manage network connections
The subtleties of working with AirSlax
Intercept the target
Disconnect client
WPA password
Save the result.
Create bootable flash drives.
Fix partition on the flash drive.
Start WiFi Slax (Linux) on a virtual machine in VMware Workstation on Windows
DOWNLOAD LINKS:
http://rapidgator.net/file/9f30a50d9ac4a91af3c11818034bf5c2/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar.html
http://uploaded.net/file/408ly5tw/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar
http://www.nitroflare.com/view/EB36530A53418A0/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar
http://www.uploadable.ch/file/3ByFtKyfCGmp/6c3tk.AirSlax.5.3.PRO..Extras.Modules..Video.Cours e.rar