vandit
08-03-2013, 07:11 PM
SolidWorks 2013 SP1.0 UPDATE ONLY Multilanguage
http://imagepicsa.com/upload/small/2013/07/16/51e5107dcebb0.jpeg
SolidWorks 2013 SP1.0 UPDATE ONLY Multilanguage | 4.94 GB
SolidWorks - computer-aided design, engineering analysis and manufacture of products of any complexity and purpose. SolidWorks is the core of an integrated set of enterprise automation, through which the support of the product life cycle in accordance with the concept of CALS-technologies, including bi-directional data exchange with other Windows-based applications and the creation of online documentation.
What's fixed in SolidWorks 2013 SP1:
209536 Draft feature is not highlighted in FeatureManager when selcted from graphics area
346012 Need feature scope support for ModelDoc2::InsertCutSurface and SurfaceCutFeatureData
464195 AddItemNotify not fired when a sketch is added
519376 Opening part using a BOM opens last saved configuration instead of the one used in the drawing view
521518 Adding board cut-outs using additional Board_Outline features does not work correctly, material is added rather than removed
533223 Develop a tool to compare results from different flow runs easily
556312 Crop and detail view of exploded state assembly does not display correctly (part of the assembly is cut) when displayed in shaded mode
564852 Adding prefix to Pack and Go does not update linked equation reference
568267 Delete view in view orientation window on drawing not possible
569854 Customer cannot select predefined sensors as constraints
575069 'Document Layer Defaults' assigned to dimensions do not work when using Insert > Model Items
586982 German: Hole callout dimension does not display comma as decimal separator.
591053 Hole callout fails to display leading zeros in drawings SolidWorks 597652 Virtual wall with shell surface is ignored
618789 Partial cut (Up to mid offset surface) with normal cut checked goes thru the part
631632 If a linked variable name contains a dash (hyphen, minus sign) it will be evaluated incorrectly in equations
636004 IBody2::GetCoincidenceMatrix obtains incorrect matrix for mirrored bodies
645784 instability inserting block by drag and drop from design library a second time with view palette populated
651103 Parentheses are linked to copied dimensions (Ctrl-dragged) inserted via Insert Model Items after force rebuilding drawing
651190 Error 'At least two bodies are interfering. Do you want to check interference?' when trying to mesh multibody part with bonded compatible mesh
656267 Very slow editing/managing and confirming equations dialog when the file contains several equations
661460 Options search finds but does not highlight hyperlinks in options pages (Tell me more, Default Appearance, Default scene)
663203 Crash when inserting block if opening the file and rebuild (CTRL_B)
665715 Convergence Description and Solver parameter buttons and windows are not available in the Russian interface in static, frequency, linear dynamic study iterative solver
666747 Failed to create mounting boss under user interface of non-English foreign language
670725 Create3PointArc doesn't create the same arc as the UI in a 3D sketch if SetAddToDB is set to True
675103 Hidden lines of assembly component are not shown even though components are selected to Show Hidden Edges in drawing view.
675479 Windows Server 2003 SP2 is unsupported in SolidWorks Workgroup PDM Server 2013 SP0 Install
675937 HLR - Show Hidden Edges - for a time fraction they are visible, then disappear.
Extras. Information:
1. To update requires pre SW2013!
2. It is strongly recommended to start the download only lyricist and readme_Win32.txt readme_Win64.txt of root distribution and review them to decide what to download and how to perform the update!. Download all entirely optional!
3. The list is given in the file bugfixed SW2013_SP1.0_fixes.pdf
Year: 2012
Version: 2012 SP1.0
Developer: DSS SolidWorks Corp
Site Developer: http://www.solidworks.com/
Bit depth: 32bit +64 bit
Language: Multilingual
System requirements: Te same as in SolidWorks 2013 SP0.0
x86/x64 Windows Vista, Windows 7 x86/x64, Windows 8 x64 (Windows XP and Windows 8 x32 NOT SUPPORTED!)
http://uploaded.net/file/w9lr26kz/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar
http://uploaded.net/file/1zccsv3f/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar
http://uploaded.net/file/frkpjsro/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar
http://uploaded.net/file/b1vsoiw2/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar
http://uploaded.net/file/3lbkm27m/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar
Mirror:
http://u19381651.letitbit.net/download/35368.3e03795754f472fde5d7bde6f127/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar.html
http://u19381651.letitbit.net/download/07774.0ade702760d08a1f418fc77f2b16/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar.html
http://u19381651.letitbit.net/download/19726.19ed00b46e0ae01dfcdb1b06a25e/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar.html
http://u19381651.letitbit.net/download/13933.1ca303e655c835dc2590992ae157/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar.html
http://u19381651.letitbit.net/download/20255.29d55a9ad2aeae607cb78deb7681/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar.html
Mirror2:
http://u18333771.shareflare.net/download/06457.0bf9872049a50974ceb7571c543c/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar.html
http://u18333771.shareflare.net/download/43302.486bfab5b5fd8d9bc414992742a9/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar.html
http://u18333771.shareflare.net/download/50905.5f80d1ae880e52f7f9fccfa8bd24/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar.html
http://u18333771.shareflare.net/download/11357.15f7797770f21fce02355fa8c32f/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar.html
http://u18333771.shareflare.net/download/22607.2c4fc4c8a2514102a3df311f72b7/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar.html
Mirror3:
http://rapidgator.net/file/8f8cb2182beaef9bd1fddba386d9aded/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar.html
http://rapidgator.net/file/28f040071b80a4ab6ce9569a5b243664/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar.html
http://rapidgator.net/file/6f525c9a4c01e2b1467eacf4f985bba0/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar.html
http://rapidgator.net/file/923d38070f105ed39d19b7f06506e638/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar.html
http://rapidgator.net/file/30324b0f68e556cde5143d1842bcd0c5/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar.html
http://imagepicsa.com/upload/small/2013/07/16/51e5107dcebb0.jpeg
SolidWorks 2013 SP1.0 UPDATE ONLY Multilanguage | 4.94 GB
SolidWorks - computer-aided design, engineering analysis and manufacture of products of any complexity and purpose. SolidWorks is the core of an integrated set of enterprise automation, through which the support of the product life cycle in accordance with the concept of CALS-technologies, including bi-directional data exchange with other Windows-based applications and the creation of online documentation.
What's fixed in SolidWorks 2013 SP1:
209536 Draft feature is not highlighted in FeatureManager when selcted from graphics area
346012 Need feature scope support for ModelDoc2::InsertCutSurface and SurfaceCutFeatureData
464195 AddItemNotify not fired when a sketch is added
519376 Opening part using a BOM opens last saved configuration instead of the one used in the drawing view
521518 Adding board cut-outs using additional Board_Outline features does not work correctly, material is added rather than removed
533223 Develop a tool to compare results from different flow runs easily
556312 Crop and detail view of exploded state assembly does not display correctly (part of the assembly is cut) when displayed in shaded mode
564852 Adding prefix to Pack and Go does not update linked equation reference
568267 Delete view in view orientation window on drawing not possible
569854 Customer cannot select predefined sensors as constraints
575069 'Document Layer Defaults' assigned to dimensions do not work when using Insert > Model Items
586982 German: Hole callout dimension does not display comma as decimal separator.
591053 Hole callout fails to display leading zeros in drawings SolidWorks 597652 Virtual wall with shell surface is ignored
618789 Partial cut (Up to mid offset surface) with normal cut checked goes thru the part
631632 If a linked variable name contains a dash (hyphen, minus sign) it will be evaluated incorrectly in equations
636004 IBody2::GetCoincidenceMatrix obtains incorrect matrix for mirrored bodies
645784 instability inserting block by drag and drop from design library a second time with view palette populated
651103 Parentheses are linked to copied dimensions (Ctrl-dragged) inserted via Insert Model Items after force rebuilding drawing
651190 Error 'At least two bodies are interfering. Do you want to check interference?' when trying to mesh multibody part with bonded compatible mesh
656267 Very slow editing/managing and confirming equations dialog when the file contains several equations
661460 Options search finds but does not highlight hyperlinks in options pages (Tell me more, Default Appearance, Default scene)
663203 Crash when inserting block if opening the file and rebuild (CTRL_B)
665715 Convergence Description and Solver parameter buttons and windows are not available in the Russian interface in static, frequency, linear dynamic study iterative solver
666747 Failed to create mounting boss under user interface of non-English foreign language
670725 Create3PointArc doesn't create the same arc as the UI in a 3D sketch if SetAddToDB is set to True
675103 Hidden lines of assembly component are not shown even though components are selected to Show Hidden Edges in drawing view.
675479 Windows Server 2003 SP2 is unsupported in SolidWorks Workgroup PDM Server 2013 SP0 Install
675937 HLR - Show Hidden Edges - for a time fraction they are visible, then disappear.
Extras. Information:
1. To update requires pre SW2013!
2. It is strongly recommended to start the download only lyricist and readme_Win32.txt readme_Win64.txt of root distribution and review them to decide what to download and how to perform the update!. Download all entirely optional!
3. The list is given in the file bugfixed SW2013_SP1.0_fixes.pdf
Year: 2012
Version: 2012 SP1.0
Developer: DSS SolidWorks Corp
Site Developer: http://www.solidworks.com/
Bit depth: 32bit +64 bit
Language: Multilingual
System requirements: Te same as in SolidWorks 2013 SP0.0
x86/x64 Windows Vista, Windows 7 x86/x64, Windows 8 x64 (Windows XP and Windows 8 x32 NOT SUPPORTED!)
http://uploaded.net/file/w9lr26kz/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar
http://uploaded.net/file/1zccsv3f/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar
http://uploaded.net/file/frkpjsro/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar
http://uploaded.net/file/b1vsoiw2/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar
http://uploaded.net/file/3lbkm27m/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar
Mirror:
http://u19381651.letitbit.net/download/35368.3e03795754f472fde5d7bde6f127/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar.html
http://u19381651.letitbit.net/download/07774.0ade702760d08a1f418fc77f2b16/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar.html
http://u19381651.letitbit.net/download/19726.19ed00b46e0ae01dfcdb1b06a25e/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar.html
http://u19381651.letitbit.net/download/13933.1ca303e655c835dc2590992ae157/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar.html
http://u19381651.letitbit.net/download/20255.29d55a9ad2aeae607cb78deb7681/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar.html
Mirror2:
http://u18333771.shareflare.net/download/06457.0bf9872049a50974ceb7571c543c/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar.html
http://u18333771.shareflare.net/download/43302.486bfab5b5fd8d9bc414992742a9/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar.html
http://u18333771.shareflare.net/download/50905.5f80d1ae880e52f7f9fccfa8bd24/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar.html
http://u18333771.shareflare.net/download/11357.15f7797770f21fce02355fa8c32f/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar.html
http://u18333771.shareflare.net/download/22607.2c4fc4c8a2514102a3df311f72b7/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar.html
Mirror3:
http://rapidgator.net/file/8f8cb2182beaef9bd1fddba386d9aded/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt1.rar.html
http://rapidgator.net/file/28f040071b80a4ab6ce9569a5b243664/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt2.rar.html
http://rapidgator.net/file/6f525c9a4c01e2b1467eacf4f985bba0/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt3.rar.html
http://rapidgator.net/file/923d38070f105ed39d19b7f06506e638/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt4.rar.html
http://rapidgator.net/file/30324b0f68e556cde5143d1842bcd0c5/SolidWorks.2013.SP1.0.UPDATE.ONLY.Multilanguage.pa rt5.rar.html