air_black
03-06-2014, 07:48 PM
Siemens PLM NX 8.5.1 MP05 Update
http://i60.fastpic.ru/big/2014/0302/2b/31c8e26501fb4b58e8052b84a1cf8a2b.jpg
Siemens PLM NX 8.5.1 MP05 Update | 724.4 MB
Siemens PLM Software has released an Maintenance Release 05 of NX 8.5.1 software, the company's fully integrated computer-aided design, manufacturing and engineering analysis (CAD/CAM/CAE) solution.
Alongside updates and enhancements to the core tools in NX, the 8.5 release sees the system gain two new options in the area of Design for Manufacture - both based on third-party technology.
The first comes from Geometric Solutions (a component vendor) and is based on DFM Pro.
DFM Pro is a set of design for manufacture checks that looks at part geometry for manufacturability against a set of defined process including prismatic milling, sheet metal fabrication, turning etc.
Integrated into the HD PLM visualisation environment, it'll flag up any issues it finds directly on the model.
For example, in a sheet metal component the user may want to ensure holes are not too close to the edge of a plate (companies often want more than one material thickness gap between the edge and a hole) or that a turned part doesn't have internal corner radii that are too small (based on the available tooling and machine capabilities).
All of this can be reported on and integrated into a working process.
The second is the integration of technology from Moldex3D, a Taiwanese outfit that specialises in the simulation of the injection moulding process. There's two versions available. Those that have the mould tool design products licensed will get the basic version.
It can be used to define gating locations, mould temperature and material and will offer basic simulation of how the part fills.
The full version adds metrics such as weld lines, air pockets and such. It's interesting to note that every time the system is run, it stores the results set in the part geometry.
Whereas other systems typically dump the existing results and only keep the current one, this provides greater traceability and ease of experimentation.
Maintenance Pack 5 for NX 8.5.1:
- The problem in Teamcenter Integration for NX where the reference "APPUID-OBJ" was missing when an altrep was created in Teamcenter is fixed.
- The problem in Teamcenter Integration for NX where a SIM file could not be created from a template is fixed.
- The problem where some surface finish PMI symbols did not update correctly during rotate is fixed.
- The problem where an assembly failed to load with message "Array attribute with same title, OWNING_SITE, as the given non-array attribute" is fixed.
- The problem where a component could not be loaded in an assembly which was exported from Teamcenter is fixed.
- The problem where the Part Navigator did not maintain attribute names that contained underscores is fixed.
- The problem where the Modify Part Preview option did not change the Modified Status of a part is fixed.
- The problem where unnecessary component loading occurred after renaming a reference set is fixed.
- The problem where the error "Filename must be unique within a data manager" occurred when opening a new Revision is fixed.
- The problem in Drafting where a distance tolerance was changed on import of DXF/DWG files with polylines is fixed.
DOWNLOAD LINKS:
http://u19822771.letitbit.net/download/99865.940f67ba4c40aeb5fdc347fe65ab/jnm55.ensSPL85132bM05pd.rar.html
http://u19822771.letitbit.net/download/12602.134f1db6e9b9289e3604a8cd7d21/jnm55.ensSPL85164bM05pd.rar.html
http://u18188361.shareflare.net/download/00613.00e4b3b09b16395219a28030d827/jnm55.ensSPL85132bM05pd.rar.html
http://u18188361.shareflare.net/download/89247.80f3dde6433fecb120955d27e290/jnm55.ensSPL85164bM05pd.rar.html
http://uploaded.net/file/j6gci2bn/jnm55.ensSPL85132bM05pd.rar
http://uploaded.net/file/ok6zswv0/jnm55.ensSPL85164bM05pd.rar
http://rapidgator.net/file/5e2d96b348a02f12636017787d1200a4/jnm55.ensSPL85132bM05pd.rar.html
http://rapidgator.net/file/988a8f22dfea0b3a8c2fc6f0a61da710/jnm55.ensSPL85164bM05pd.rar.html
http://i60.fastpic.ru/big/2014/0302/2b/31c8e26501fb4b58e8052b84a1cf8a2b.jpg
Siemens PLM NX 8.5.1 MP05 Update | 724.4 MB
Siemens PLM Software has released an Maintenance Release 05 of NX 8.5.1 software, the company's fully integrated computer-aided design, manufacturing and engineering analysis (CAD/CAM/CAE) solution.
Alongside updates and enhancements to the core tools in NX, the 8.5 release sees the system gain two new options in the area of Design for Manufacture - both based on third-party technology.
The first comes from Geometric Solutions (a component vendor) and is based on DFM Pro.
DFM Pro is a set of design for manufacture checks that looks at part geometry for manufacturability against a set of defined process including prismatic milling, sheet metal fabrication, turning etc.
Integrated into the HD PLM visualisation environment, it'll flag up any issues it finds directly on the model.
For example, in a sheet metal component the user may want to ensure holes are not too close to the edge of a plate (companies often want more than one material thickness gap between the edge and a hole) or that a turned part doesn't have internal corner radii that are too small (based on the available tooling and machine capabilities).
All of this can be reported on and integrated into a working process.
The second is the integration of technology from Moldex3D, a Taiwanese outfit that specialises in the simulation of the injection moulding process. There's two versions available. Those that have the mould tool design products licensed will get the basic version.
It can be used to define gating locations, mould temperature and material and will offer basic simulation of how the part fills.
The full version adds metrics such as weld lines, air pockets and such. It's interesting to note that every time the system is run, it stores the results set in the part geometry.
Whereas other systems typically dump the existing results and only keep the current one, this provides greater traceability and ease of experimentation.
Maintenance Pack 5 for NX 8.5.1:
- The problem in Teamcenter Integration for NX where the reference "APPUID-OBJ" was missing when an altrep was created in Teamcenter is fixed.
- The problem in Teamcenter Integration for NX where a SIM file could not be created from a template is fixed.
- The problem where some surface finish PMI symbols did not update correctly during rotate is fixed.
- The problem where an assembly failed to load with message "Array attribute with same title, OWNING_SITE, as the given non-array attribute" is fixed.
- The problem where a component could not be loaded in an assembly which was exported from Teamcenter is fixed.
- The problem where the Part Navigator did not maintain attribute names that contained underscores is fixed.
- The problem where the Modify Part Preview option did not change the Modified Status of a part is fixed.
- The problem where unnecessary component loading occurred after renaming a reference set is fixed.
- The problem where the error "Filename must be unique within a data manager" occurred when opening a new Revision is fixed.
- The problem in Drafting where a distance tolerance was changed on import of DXF/DWG files with polylines is fixed.
DOWNLOAD LINKS:
http://u19822771.letitbit.net/download/99865.940f67ba4c40aeb5fdc347fe65ab/jnm55.ensSPL85132bM05pd.rar.html
http://u19822771.letitbit.net/download/12602.134f1db6e9b9289e3604a8cd7d21/jnm55.ensSPL85164bM05pd.rar.html
http://u18188361.shareflare.net/download/00613.00e4b3b09b16395219a28030d827/jnm55.ensSPL85132bM05pd.rar.html
http://u18188361.shareflare.net/download/89247.80f3dde6433fecb120955d27e290/jnm55.ensSPL85164bM05pd.rar.html
http://uploaded.net/file/j6gci2bn/jnm55.ensSPL85132bM05pd.rar
http://uploaded.net/file/ok6zswv0/jnm55.ensSPL85164bM05pd.rar
http://rapidgator.net/file/5e2d96b348a02f12636017787d1200a4/jnm55.ensSPL85132bM05pd.rar.html
http://rapidgator.net/file/988a8f22dfea0b3a8c2fc6f0a61da710/jnm55.ensSPL85164bM05pd.rar.html